Goods and services for 20-0.4 kV
Oryginalny tytuł ogłoszenia
Denmark – Electrical machinery, apparatus, equipment and consumables; lighting – Qualicifation system - Procurement of Goods & Services to 20-0,4 kV for N1 A/S
Ocena szansy
Skąd ta ocena?
Szansa
60 / 100
Złożoność
50 / 100
Czynniki ryzyka
Requirement for positive equity (LOT-0001) or solvency ratio of 20% (LOT-0002) may be challenging for some suppliers. F...
References must be within the last three years and comparable in scope. If recent projects are insufficient, qualificat...
Głęboka analiza portfolio
Wykorzystuje:
- Description
- Industries & Services
- Capabilities
- Market & Experience
- Certifications
Przegląd
Moderate opportunityKluczowe fakty
- Supplies contract
- 3 lots
- Supply of electrical equipment and services for 20-0.4 kV networks
- Three categories: DSO control cabinets, substations/switchgear, and distribution transformers
Pokaż pełne podsumowanie
This is a qualification system for the procurement of goods and services for 20-0.4 kV electrical equipment for N1 A/S, managed by Norlys Holding A/S. The system covers three categories (lots): Complete DSO control cabinets, 10-20/0.4 kV substations and switchgear, and distribution transformers. Suppliers must apply for qualification in specific categories. Admission does not guarantee contracts but allows invitation to future tenders. The system runs until 2050-12-31. No estimated contract values are provided. There is inconsistency regarding EU funding: structured data indicates EU-funded for some lots, while the XML notice states 'no-eu-funds'.
Ryzyka
Requirement for positive equity (LOT-0001) or solvency ratio of 20% (LOT-0002) may be challenging for some suppliers. F...
References must be within the last three years and comparable in scope. If recent projects are insufficient, qualificat...
Analiza może być niepełna
Przeanalizowano tylko część dokumentacji. Pozostałe dokumenty mogą zawierać dodatkowe wymagania, certyfikaty lub dokumenty do złożenia.
Kluczowe wymagania
Technical
- Admission to the qualification system is required before being invited to tender for specific contracts
- Qualification is category-specific
- Suppliers may be limited based on references and product types
Wymagania mogą być niepełne.
Zamawiający
Nazwa
Lokalizacja
Silkeborg, DNK
Identyfikator
Norlys Holding A/S
Działalność
Electricity-related activities
Części (3)
LOT-0001
Complete DSO Control Cabinets
Supply of complete DSO control cabinets including RTU units, central configuration and management tool, and configuration software for remote control of switchgear in 10-20/0.4 kV substations.
Lokalizacja
Kategoria
Termin
Szczegóły kryteriów
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. Complete DSO (Distribution management and monitoring) control cabinets: - Complete DSO (Distribution management and monitoring) control cabinets, including RTU units, for remote control of switchgear in 10-20/0,4kV Substations, via MODBUS communication. Components/spare parts for retrofitting. - Central Configuration and Management tool solution for the RTU units, including implementation and commission. - Configuration tool (Engineering Software) for the RTU units.
Dodatkowe kody CPV
Uwaga do wartości
Pokaż oryginalne dane TED
Oryginalny tytuł części
Complete DSO (Distribution management and monitoring) control cabinets
Oryginalny opis TED
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. Complete DSO (Distribution management and monitoring) control cabinets: - Complete DSO (Distribution management and monitoring) control cabinets, including RTU units, for remote control of switchgear in 10-20/0,4kV Substations, via MODBUS communication. Components/spare parts for retrofitting. - Central Configuration and Management tool solution for the RTU units, including implementation and commission. - Configuration tool (Engineering Software) for the RTU units.
LOT-0002
10-20/0.4 kV Substations & Switchgear
Supply of indoor and outdoor substations from 200 kVA to 2x1600 kVA in C5 environment, including low-voltage switchboards and switchgear, custom-built substations, loose switchgear, and technical housings.
Lokalizacja
Kategoria
Termin
Szczegóły kryteriów
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. 10-20/0,4 kV Substations & Switchgear: - 200-1000 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - 1600 kVA, 2x1000 kVA and 2x1600 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - Custom built substations, with special dimensions, sedum roof, wood panels on side walls etc. in sizes 200-1000 kVA, 1600 kVA, 2x1000 kVA and 2x1600 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - Loose switchgear 12-17,5-24kV incl. plinth. - Loose “stand alone” low-voltage switchboards incl. accessories e.g. fuselists, circuit breaker, connection terminals etc. for substations. - Technical housing, in C5 environment, for 12-24kV Switchgear. - Technical housing, in C5 environment, for Arc suppression coil.
Dodatkowe kody CPV
Uwaga do wartości
Pokaż oryginalne dane TED
Oryginalny tytuł części
10-20/0,4 kV Substations & Switchgear
Oryginalny opis TED
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. 10-20/0,4 kV Substations & Switchgear: - 200-1000 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - 1600 kVA, 2x1000 kVA and 2x1600 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - Custom built substations, with special dimensions, sedum roof, wood panels on side walls etc. in sizes 200-1000 kVA, 1600 kVA, 2x1000 kVA and 2x1600 kVA inside and outside operated substations, in C5 environment, incl. Low-voltage switchboards and 12-17,5-24 kV switchgear with fuse or relay. - Loose switchgear 12-17,5-24kV incl. plinth. - Loose “stand alone” low-voltage switchboards incl. accessories e.g. fuselists, circuit breaker, connection terminals etc. for substations. - Technical housing, in C5 environment, for 12-24kV Switchgear. - Technical housing, in C5 environment, for Arc suppression coil.
LOT-0003
Distribution Transformers
Supply of oil sealed distribution transformers (10.5/0.42 kV, 15.75/0.42 kV, 21.0/0.42 kV) and accessories.
Lokalizacja
Kategoria
Termin
Szczegóły kryteriów
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. Distribution transformers: - 10,5/0,42 kV, 15,75/0,42 kV and 21,0/0,42 kV oil sealed distribution transformers. - Accessories for distribution transformers e.g. wheel, oil/temperature meter, LV flags and connectors etc.
Dodatkowe kody CPV
Uwaga do wartości
Pokaż oryginalne dane TED
Oryginalny tytuł części
Distribution transformers
Oryginalny opis TED
The qualification system is used to procure Goods & Services to 20-0,4 kV for the entire supply area of the End Customer. In the request to participate, the Applicant must state which category/categories the Applicant is requesting qualification for. The Applicant is also asked to indicate in the request to participate which products and/or services the Applicant can supply within the individual category. The Applicant can request qualification for the categories below. The specified products and/or services within each category is the products and/or services that the Contracting Entity expects to invite tenders for. In the duration of the qualification system, the Contracting Entity may add additional categories and/or add additional products and/or services to an existing category if needed. Distribution transformers: - 10,5/0,42 kV, 15,75/0,42 kV and 21,0/0,42 kV oil sealed distribution transformers. - Accessories for distribution transformers e.g. wheel, oil/temperature meter, LV flags and connectors etc.
Szczegóły zamówienia
- Data publikacji
- 01 Dec 2025
- Języki
- English
Metadane referencyjne
- Podstawa prawna
- 32014L0025
Identyfikatory referencyjne
- ID przetargu
- 798857-2025
Dokumenty (2)
Podobne przetargi
Romania – Turbine works – Retehnologizare C.H.E. Gogoșu
Poland – Construction work – Budowa systemu ładowania autobusów elektrycznych na terenie Oddziału Przewozów R-1 „Woronicza”
Denmark – Transformer substation – Hinnerup Fjernvarme - Transformer udbud
France – Electric motors, generators and transformers – Fourniture, installation, mise en service et maintenance d'un système de propulsion marine hybride diesel-électrique pour l'atelier mécanique du Lycée Maritime et Aquacole de La Rochelle
Netherlands – Electric motors, generators and transformers – Leveren van mobiele transformator- stations
France – Uninterruptible power supplies – Fourniture, installation, raccordement, mise en service et essais d'une nouvelle source d'alimentation ondulée destinée aux installations critiques du site hospitalier de La Seyne sur Mer (83)
Ocena szansy
Skąd ta ocena?
Szansa
60 / 100
Złożoność
50 / 100
Czynniki ryzyka
Requirement for positive equity (LOT-0001) or solvency ratio of 20% (LOT-0002) may be challenging for some suppliers. F...
References must be within the last three years and comparable in scope. If recent projects are insufficient, qualificat...
Głęboka analiza portfolio
Wykorzystuje:
- Description
- Industries & Services
- Capabilities
- Market & Experience
- Certifications